Build your own wind turbine in 11 steps:

Build your own wind turbine in 11 steps:
1.85

In this DIY video-guide, we learn how to make a wind turbine using neodymium magnets and copper coils. These step-by-step videos are in German but can be easily understood.

Step 1: Before you build a large generator, it is better to build a smaller one as a test.

Step 2: Measure the open circuit voltage and the short circuit current of the small test generator. It gives an indication of tells what you can do to improve the generator.

Step 3: DIY Windmill generator: the stator

Step 4: DIY Windmill generator: wrap the copper coils

Step 5: DIY Windmill generator: install the coils

Step 6: DIY Windmill generator: bathe in polyester resin

Step 7: DIY Windmill generator: test on vertical wind

Step 8: Here is the first part of the theory for Delon voltage doubler. You can increase the output voltage from the wind turbine.

Step 9: Second part of the theory for Delon voltage doubler.

Step 10: Solder the voltage doubler

Step 11: Test the voltage doubler –

Thanks to Chris Will Know who developed these great DIY instructions and made them available to all.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply